2 be more precise to manually enter parameters
source | link

I am builing an embedded device with ethernet network connectivity which will being sold to business (industrial) customers.

For inital setup the customer needs to adjust network settings as

  • IP address (IPv4), e.g. 192.168.1.123
  • DNS server, e.g. 192.168.1.1
  • Subnet-Mask, e.g. 255.255.255.0

Since the customers are in industrial environments we cannot rely on existing dhcp servers. So the customer needs

  • to configure his PC/laptop to a predefined ip address
  • make the network settings of the embedded system
  • to reconfigure his PC/laptop back to the company network settings.

Unfortunately many companies do not allow this for users and this requires too much network knowledge. I need a little utility to set network settings of the embedded device via UDP.

The utility should

  • run on windows 7 to 10
  • have a graphical user interface OR a command line interface to manually enter network configuration parapeters
  • should detect similar devices on the IP subnet and list them
  • allow to set the network configuration via UDP
  • be a standalone .exe program and run without installation

Where can i find such a (free, open source) utilitity?

I am builing an embedded device with ethernet network connectivity which will being sold to business (industrial) customers.

For inital setup the customer needs to adjust network settings as

  • IP address (IPv4), e.g. 192.168.1.123
  • DNS server, e.g. 192.168.1.1
  • Subnet-Mask, e.g. 255.255.255.0

Since the customers are in industrial environments we cannot rely on existing dhcp servers. So the customer needs

  • to configure his PC/laptop to a predefined ip address
  • make the network settings of the embedded system
  • to reconfigure his PC/laptop back to the company network settings.

Unfortunately many companies do not allow this for users and this requires too much network knowledge. I need a little utility to set network settings of the embedded device via UDP.

The utility should

  • run on windows 7 to 10
  • have a graphical user interface OR a command line interface
  • should detect similar devices on the IP subnet and list them
  • allow to set the network configuration via UDP
  • be a standalone .exe program and run without installation

Where can i find such a (free, open source) utilitity?

I am builing an embedded device with ethernet network connectivity which will being sold to business (industrial) customers.

For inital setup the customer needs to adjust network settings as

  • IP address (IPv4), e.g. 192.168.1.123
  • DNS server, e.g. 192.168.1.1
  • Subnet-Mask, e.g. 255.255.255.0

Since the customers are in industrial environments we cannot rely on existing dhcp servers. So the customer needs

  • to configure his PC/laptop to a predefined ip address
  • make the network settings of the embedded system
  • to reconfigure his PC/laptop back to the company network settings.

Unfortunately many companies do not allow this for users and this requires too much network knowledge. I need a little utility to set network settings of the embedded device via UDP.

The utility should

  • run on windows 7 to 10
  • have a graphical user interface OR a command line interface to manually enter network configuration parapeters
  • should detect similar devices on the IP subnet and list them
  • allow to set the network configuration via UDP
  • be a standalone .exe program and run without installation

Where can i find such a (free, open source) utilitity?

1
source | link

Utility for setting network configuration per UDP

I am builing an embedded device with ethernet network connectivity which will being sold to business (industrial) customers.

For inital setup the customer needs to adjust network settings as

  • IP address (IPv4), e.g. 192.168.1.123
  • DNS server, e.g. 192.168.1.1
  • Subnet-Mask, e.g. 255.255.255.0

Since the customers are in industrial environments we cannot rely on existing dhcp servers. So the customer needs

  • to configure his PC/laptop to a predefined ip address
  • make the network settings of the embedded system
  • to reconfigure his PC/laptop back to the company network settings.

Unfortunately many companies do not allow this for users and this requires too much network knowledge. I need a little utility to set network settings of the embedded device via UDP.

The utility should

  • run on windows 7 to 10
  • have a graphical user interface OR a command line interface
  • should detect similar devices on the IP subnet and list them
  • allow to set the network configuration via UDP
  • be a standalone .exe program and run without installation

Where can i find such a (free, open source) utilitity?